C modeling
==============

Characteristics of modeling
-----------------------------------
Q4 elements are used to mesh the surface of the cylinder. 

     The interface model between solid and fluid has the following characteristics:

         - Modeling: '3D', Phenomenon: 'Thermal'
         - Modeling: '3D', Phenomenon: 'Mechanics'
         - Modeling: 'FLUI_STRU', Phenomenon: 'Mechanics'


Tested sizes and results
------------------------------

The results are tested with the three types of interfaces by considering a field of type MODE_MECA. 

.. csv-table::

    "**Identification**", "**frequency (** :math:`\mathit{Hz}` **)**", "**Reference type**", "**Reference**", "**%** tolerance"
    ":math:`\mathit{DSP}(\omega )\omega =\mathrm{0,01}` ", "1 e-02", "'SOURCE_EXTERNE'", "252.701", "2.0"
    ":math:`\mathit{DSP}(\omega )\omega =0.1` ", "1-e-01", "'SOURCE_EXTERNE'", "249.663", "2.0"