v2.02.401 SDLL401 - Straight beam inclined at 20°, subjected to sinusoidal tensile and torsional forces

Summary:

This test is the result of the independent validation of version 4 of the beam models.

It makes it possible to check the internal forces on an inclined beam, for sinusoidal loads as a function of time (a modeling with elements POU_D_T, Timoshenko’s right beam), applied in traction-compression and then in pure torsion.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loading
• 2. Benchmark solutions
  • 2.1. Calculation method used for reference solutions
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
• 5. Summary of results