D modeling
==============

The comparison focuses on the results with those of the C calculations.


Characteristics of modeling
-----------------------------------

**Modeling**: 130 Equally distributed elements of POU_D_T beam in the :math:`z` direction


Characteristics of the mesh
----------------------------


.. csv-table::

    "Mesh:", "Number of nodes: 131"
    "", "Number of meshes and types: 130 SEG2"



Tested sizes and results
------------------------------


.. csv-table::

    "", "Calculation D
    (modulo :math:`[2\pi ]`)", "C calculation
    (modulo :math:`[2\pi ]`)", "Difference in%"
    ":math:`{Y}_{\mathrm{max}}` (in :math:`m`)", "5.7214 E-04", "5.7210 E-04"," 0.0069%"
    ":math:`{\mathrm{\theta }}_{y}` (in :math:`\mathit{deg}.`)", "-173.91", "-172.08"," 1.0600%"
    ":math:`{X}_{\mathit{max}}` (in :math:`m`)", "7.0235 E-04", "7.0230 E-04"," 0.0071%"
    ":math:`{\mathrm{\theta }}_{x}` (in :math:`\mathit{deg}.`)", "97.92", "96.09"," 1.9000%"