C modeling
==============

The comparison focuses on the results with those of calculations A and B.


Characteristics of modeling
------------------------

**Modeling**: 130 Equally distributed elements of POU_D_T beam in the :math:`x` direction


Characteristics of the mesh
----------------------------


.. csv-table::

    "Mesh:", "Number of nodes: 131"
    "", "Number of meshes and types: 130 SEG2"



Tested sizes and results
------------------------------


.. csv-table::

    "", "Calculation A", "Calculation B", "Calculation C", "Variance in%
    (between A and C)", "Difference in%
    (between B and C)"
    ":math:`{Y}_{\mathrm{max}}` (in :math:`m`)", "5.668 E-04", "5.722 E-04", "5.721 E-04"," 0.93% "," 0.02%"
    ":math:`{\theta }_{y}` (in :math:`\mathrm{deg.}`)", "-171.0", "-171.0", "-171.0", "-172.08"," 3.03% "," 3.03%"
    ":math:`{Z}_{\mathrm{max}}` (in :math:`m`)", "6.945 E-04", "7.017 E-04", "7.023 E-04"," 1.11% "," 0.09%"
    ":math:`{\theta }_{z}` (in :math:`\mathrm{deg.}`)", "99", "99", "99", "96.09"," 3.03% "," 3.03%"