H modeling
==============


Characteristics of modeling
-----------------------------------


.. image:: images/1000000000000FA0000008CAC423213DC67ADB33.png
    :width: 6.298in
    :height: 3.5425in


.. _RefImage_1000000000000FA0000008CAC423213DC67ADB33.png:

**Figure** 10.1-1


Boundary conditions
----------------------

Embedding PT_5 (DX=DY=DZ= DRX = = DRY = DRZ =0)

Support PT_10 (DY=DZ=0)

Support PT_20 (DX=DZ=0)

Embedding PT_30 (DX=DY=DZ= DRX = = DRY = DRZ =0)

Characteristics of the mesh
----------------------------

Number of knots: 25

Number of meshes and types: 24 POU_D_T


Tested sizes and results
------------------------------

      Uncertainties about the results using the reference analytical solution:


.. csv-table::

    "**Identification**", "**Reference** AFNOR ", "**Pipestress Value**", "**Aster Value**", "**Aster Gap- AFNOR**"
    "Frequency (:math:`\mathit{Hz}`) Mode 1", "17.9", "17.9", "17.64", "17.727", "0.9664804"
    "Frequency (:math:`\mathit{Hz}`) Mode 2", "24.8", "24.8", "24.386", "24.709", "0.3669355"
    "Frequency (:math:`\mathit{Hz}`) Mode 3", "25.3", "25.3", "24.885", "25.239", "0.2411067"
    "Frequency (:math:`\mathit{Hz}`) Mode 4", "27", "27", "26.631", "27.069", "0.2555556"


Table 10.4-1

Deformed from mode 1
------------------


.. image:: images/10000201000002DC0000026E8CF84D532DA8AC42.png
    :width: 5.0791in
    :height: 4.3161in


.. _RefImage_10000201000002DC0000026E8CF84D532DA8AC42.png:

**Figure** 10.5-1