v2.02.012 SDLL12 - Thin circular ring embedded in 2 points

Summary:

The dynamic linear elasticity test is used to validate straight beam elements POU_D_T.

This test case concerns a thin circular ring embedded at two points.

The frequencies are tested by comparing simulation results with the reference solution AFNOR (ref. [1]) as well as those obtained with the Pipestress software.

• 1. Reference problem
  • 1.1. Boundary condition
  • 1.2. Liaisons
  • 1.3. Geometry
  • 1.4. Material properties
  • 1.5. Bibliographical references
• 2. Modeling A
  • 2.1. Characteristics of modeling
  • 2.2. Characteristics of the mesh
  • 2.3. Tested sizes and results
  • 2.4. Modal deformed
• 3. Summary of results