Reference problem
=====================

Boundary condition
---------------------


.. image:: images/10000201000002BC000002A09EBE935C66D50044.png
    :width: 5.5154in
    :height: 5.2953in


.. _RefImage_10000201000002BC000002A09EBE935C66D50044.png:

**Figure** 1.1-1


Liaisons
--------


* Support PT_5 (kX=ky=kz=100n/m, KRX = KRY = KRZ = 0.1 N.m/rad)


* Embedding PT_140 (DX=DY=DZ= DRX = = DRY = DRZ =0)


* Embedding PT_220 (DX=DY=DZ= DRX = = DRY = DRZ =0)


Geometry
---------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Radius of curvature", "0.1", "m"
    "Area", "50", "mm²"
    "Inertia Iz", "104.2", "mm4"


Table 1.3-1


Material properties
-----------------------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Young's module", "72,000"," MPa"
    "Poisson's ratio", "0.30", "[-]"
    "Density", "2,700", "kg/m3"


Table 1.4-1


Bibliographical references
---------------------------


1. VPCS: Guide to the validation of structural calculation software packages: "test SDLL12 -89", SFM, AFNOR technique.