Reference problem
=====================

Boundary condition
---------------------


.. image:: images/100002010000033800000130701C3D621DFA5EAB.png
    :width: 6.889in
    :height: 2.5409in


.. _RefImage_100002010000033800000130701C3D621DFA5EAB.png:

**Figure** 1.1-1


Liaisons
--------


* Support PT_5 (DX=DY=DZ= DRX = = DRY =0; KRZ = 0.0001 N.m/rad)


* Support PT_13 (DY=DZ= DRX = = DRY =0; KX = 100 N/m and KRZ = 0.0001 N.m/rad)


Geometry
---------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Inertia", "5.2083*105", "mm4"
    "Area", "2 500", "mm²"


Table 1.3-1


Material properties
-----------------------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Young's module", "200,000"," MPa"
    "Poisson's ratio", "0.30", "[-]"
    "Density", "7,800", "kg/m3"


Table 1.4-1


Bibliographical references
----------------------------


1. VPCS: Guide to the validation of structural calculation software packages: "test SDLL05 -89", SFM, AFNOR technique.