Modeling A
==============

Characteristics of modeling
-----------------------------------

Elements POU_D_T and DIS_TR.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "7", "6"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Fashion", "Value AFNOR
    (Hz)", "Pipestress value
    (Hz)", "Aster value
    (Hz)", "Gap
    Aster- AFNOR (%)"
    "1", "28.702", "28.704", "28.7016526236311", "0.1 (*)"
    "2", "114.807", "114.019", "115.1410411377123", "0.9840826"


Table 2.3-1: Comparison of frequencies

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Modal deformed
---------------


.. image:: images/10000201000003BB00000276FDDC91ABDCA85272.png
    :width: 4.9307in
    :height: 3.252in


.. _RefImage_10000201000003BB00000276FDDC91ABDCA85272.png:

**Figure** 2.4-1:Deformed modal mode 1