Reference problem
=====================


Geometry
---------


.. image:: images/10002144000018E800001389091CE90579E56117.svg
    :width: 321
    :height: 252


.. _RefImage_10002144000018E800001389091CE90579E56117.svg:

The geometry represents only a quarter of the test piece CTJ25

planes of symmetry: :math:`(x{B}_{0}y)` and :math:`(x{B}_{0}z)`

Thickness: :math:`\mathrm{DD}’=12.5\mathrm{mm}`

Face1: :math:`(A,\mathrm{B0},\mathrm{B1},\mathrm{B2},\mathrm{B3},\mathrm{B4},\mathrm{B5},C,D,E)`

Face2: :math:`(A,\mathrm{B0},\mathrm{B0}\text{'},A\text{'})`

Coordinates of the points (:math:`\mathrm{mm}`):


.. csv-table::

    "", "min", "max", ":math:`B0` "," "," :math:`F` '", ":math:`B5’`"
    ":math:`x` ", "-20. ", "42.5", "0. ", "30. ", "30."
    ":math:`y` ", "0. ", "30. ", "0. ", "20.25", "3.5"
    ":math:`z` ", "0. ", "12.5", "0. ", "12.5", "12.5"



Material properties
-----------------------

:math:`E=2.027027{10}^{11}\mathrm{Pa}`

:math:`\nu =0.3`


Boundary conditions and loads
-------------------------------------


.. csv-table::

    "All the nodes on face1:", ":math:`\mathrm{DZ}=0` ", ""
    "All the nodes on face2:", ":math:`\mathrm{DY}=0` ", ""
    "All the nodes in line :math:`\mathrm{FF}\text{'}`:", ":math:`\mathrm{DX}=0` "," :math:`\mathrm{DY}=0.01`"