F modeling
==============


Characteristics of modeling
-----------------------------------

Homogenized polycrystalline behavior DD_CFC. Material point. 30 grains of fixed orientations.

The law used is PolyCrystal DDCFC .mfront


Tested sizes and results
------------------------------

We compare the solution obtained with the Mfront behavior and that obtained with the POLYCRISTAL behavior of type DD_CFC, by testing the maximum difference of the following components:


.. csv-table::

    "**Component**", "**Relative Gap**", "**Reference (Difference)**", "**Absolute Tolerance**"
    "SIZZ ", "Maximum Deviation", "0", "1.E-3"



.. image:: images/100000000000034A00000253C06B5A91FCF96A45.png
    :width: 5.5161in
    :height: 3.898in


.. _RefImage_100000000000034A00000253C06B5A91FCF96A45.png:

Constrained curves SIZZ as a function of deformations EPZZ for MFRONT and CODE_ASTER for the behavior POLYCRISTAL DD_CFC.