v1.01.410 PYNL03 — THER_NON_LINE in exploded orders

Summary:

The purpose of this test case is to validate the methodology for solving a non-linear thermal problem in exploded commands. To do this, it reproduces test case TTNL303 identically without using the THER_NON_LINE command.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. notes
  • 4.3. Tested sizes and results
• 5. Summary of results