Modeling A
==============


Characteristics of modeling
-----------------------------------

**PLAN (TRIA6)**


.. image:: images/Object_22.svg
    :width: 520
    :height: 314


.. _RefImage_Object_22.svg:


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes:", "205"
    "Number of meshes and types:", "80 TRIA6"



notes
---------

The discretization in time steps is as follows:

10 steps for :math:`[0.,1.D-3]` or :math:`\mathrm{\Delta }t=1.{D}^{-4}`

9 steps for :math:`[1.D-3,1.D-2]` or :math:`\mathrm{\Delta }t=1.{D}^{-3}`

9 steps for :math:`[1.D-2,1.D-1]` or :math:`\mathrm{\Delta }t=1.{D}^{-2}`

9 steps for :math:`[1.D-1,1.D0]` or :math:`\mathrm{\Delta }t=1.{D}^{-1}`

9 steps for :math:`[1.D0,10.D0]` or :math:`\mathrm{\Delta }t=1.0`

3 steps for :math:`[10.D0,13.D0]` or :math:`\mathrm{\Delta }t=1.0`


Tested sizes and results
------------------------------


.. csv-table::

    "Temperature :math:`(°C)` to :math:`t=13s` ", "", "", "", ""
    "N11", "128.125", "128.377", "0.197"," 2%"
    "N21", "139.970", "139.846", "-0.089"," 2%"
    "N41", "124.719", "122.209", "-2.013"," 2%"
    "N61", "107.182", "106.279", "-0.842"," 2%"
    "N81", "101.290", "101.186", "-0.103"," 2%"
    "N101", "100.134", "100.203", "0.067"," 2%"
    "N13", "128.125", "128.377", "0.197"," 2%"
    "N23", "139.970", "139.846", "-0.089"," 2%"
    "N43", "124.719", "122.209", "-2.013"," 2%"
    "N63", "107.182", "106.279", "-0.842"," 2%"
    "N83", "101.290", "101.186", "-0.103"," 2%"
    "N103", "100.134", "100.203", "0.067"," 2%"
    "N15", "128.125", "128.377", "0.197"," 2%"
    "N25", "139.970", "139.846", "-0.089"," 2%"
    "N45", "124.719", "122.209", "-2.013"," 2%"
    "N65", "107.182", "106.279", "-0.842"," 2%"
    "N85", "101.290", "101.186", "-0.103"," 2%"
    "N105", "100.134", "100.203", "0.067"," 2%"