P modeling
==============


Characteristics of modeling
-----------------------------------

We use a 3D modeling in non-linear mechanics to check the correct consideration
AFFE_CHAR_CINE type loads. We impose an embedding on one side of the cube and a
displacement (:math:`{DZ}=-0,2`) on the face opposite to the embedment.


Characteristics of the mesh
----------------------------

The mesh contains 216 elements of type HEXA8.


Tested sizes and results
------------------------------

We test the minimum value of the displacement in :math:`Z` obtained with a model reduced by
compared to that obtained in the complete model:


.. csv-table::

    "**Location**", "**Instant**", "**Component**", "Reference Value", "**Precision**"
    "Minimum on the full model", ":math:`t=1s` ", "DZ", "-0.2"," 0.0%"
    "Minimum on the scale model", ":math:`t=1s` ", "DZ", "-0.2", "1.698089E -07%"