C modeling
==============


Characteristics of the mesh
----------------------------

Same mesh as in modeling A.


Tested sizes and results
------------------------------

The bifurcation is located along an edge, on the segment of vertex nodes :math:`(\mathrm{0,}0.5)`, :math:`(\mathrm{0,}0.625)` and middle node :math:`(\mathrm{0,}0.5625)`. The fork takes place precisely at point :math:`(\mathrm{0,}0.6)` and the interface does not go through the middle node.

We then test the movement on the middle node positioned in :math:`(\mathrm{0,}0.5625)`, to verify that it is positioned on the "right" side of the interface.


*
    *
        *


.. csv-table::

    "**Identification**", "**Reference**", "**Tolerance**"
    "DEPL_X ", "", ""
    "NO_M: H1X", "1.0", "1E -12%"
    "NO_M: DX", "1.0", "1E -12%"



Additional results
-------------------------


.. image:: images/10000000000001EA000001E95C8B7C776D9293DF.png
    :width: 5.5055in
    :height: 5.4945in


.. _RefImage_10000000000001EA000001E95C8B7C776D9293DF.png:

Figure 4.3-1: Field of movement along X for the bifurcation "after" the midpoint