Modeling A
==============

Characteristics of modeling
-----------------------------------

Mesh of a cylinder, with a circular base with radius :math:`\mathrm{50m}`, with a height :math:`\mathrm{120m}`.


Tested values
---------------

Test on concepts from affe_cara_elem using the test_file command.


.. image:: images/1000000000000438000002F5CCA71791146D27A6.png
    :width: 5.4008in
    :height: 3.7236in


.. _RefImage_1000000000000438000002F5CCA71791146D27A6.png:

The figure above (obtained with Salome) represents the thickness of the shell. This view is created by post-processing the med file obtained with the impr_resu/concept command.