Modeling A
==============

In **modeling A**, we study the 2D structure with, first, the definition of the lower and upper lips of the crack and then by defining only the bottom node.


Characteristics of the mesh
-----------------------------

     The mesh is shown in the following figure:


.. image:: images/100000000000057F000002BF05B2DA76C1DB6B07.png
    :width: 6.8898in
    :height: 3.4425in


.. _RefImage_100000000000057F000002BF05B2DA76C1DB6B07.png:

It is composed of 296 knots for 513 TRIA3 elements. The crack bottom is composed of a single node located at coordinate :math:`(0.5\mathrm{,0}.5)`.


Tested sizes and results
------------------------------


* DEFI_FOND_FISS with LEVRE_SUPet LEVRE_INF:


.. csv-table::

    "**Quantities**", "**Analytical value**"
    "**VNORX**", "0.0"
    "**VNORY**", "-1.0"
    "**VDIRX**", "1.0"
    "**VDIRY**", "0.0"