v1.01.269 PYNL02 - STAT_NON_LINE in exploded commands for an elasto-plastic calculation

Summary:

The purpose of this document is to validate the methodology for solving a non-linear problem (here an elasto-plasticity problem) in exploded commands, without using the STAT_NON_LINE command.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results