Modeling A
==============


Characteristics of modeling
-----------------------------------

In this modeling, command STAT_NON_LINE is replaced by exploded commands. Boundary conditions are applied by dualization (Lagranges)


Characteristics of the mesh
----------------------------

The mesh is composed of a single HEXA8 mesh.


Tested sizes and results
------------------------------

The difference between the field of constraints (respectively of internal variables) calculated by STAT_NON_LINEet by the command CALCUL is tested, at convergence at the last moment.


.. csv-table::

    "**Identification**", "**Reference**", ":math:`\text{\%}` **difference**"
    ":math:`\mathrm{min}(\Delta \sigma )` ", "0", "0"
    ":math:`\mathrm{max}(\Delta \sigma )` ", "0", "0"
    ":math:`\mathrm{min}(\Delta v)` ", "0", "0"
    ":math:`\mathrm{max}(\Delta v)` ", "0", "0"


The convergence table is also identical to the reference one:


.. image:: images/100000000000024B000000BE21A2319C1A70191E.png
    :width: 5.9283in
    :height: 1.939in


.. _RefImage_100000000000024B000000BE21A2319C1A70191E.png:

Figure 3.3-1: Convergence table obtained via command CALCUL