B modeling
==============


Characteristics of modeling
-----------------------------------

The modeling is three-dimensional.


Characteristics of the mesh
----------------------------

The mesh contains 1 3D elementary mesh of type HEXA8.


Tested sizes and results
------------------------------

For this modeling, the analytical values and the tolerances are listed in the table below:


.. csv-table::

    "Instant", ":math:`{\sigma }_{\mathrm{Bordet}}` theoretical", ":math:`{P}_{\mathrm{Bordet}}` theoretical", "Error on :math:`{\sigma }_{\mathrm{Bordet}}` ", "Error on :math:`{P}_{\mathrm{Bordet}}`"
    "0", "0", "0.0000", "0", "0"
    "1", "0", "0.0000", "0", "0"
    "2", "211.75", "0.3500", "< 0.1% ", "< 0.1%", "< 0.1%"
    "3", "215.64", "0.2150", "< 0.1% ", "< 0.1%", "< 0.1%"
    "4", "217.24", "0.11", "< 0.1% ", "< 0.1%", "< 0.1%"
    "5", "217.75", "0.0467", "< 0.1% ", "< 0.3%"


**Table** 4.1 **: B** modeling results**

The difference is almost zero in all cases.