v1.01.248 PLEXU02 — Verification of the CALC_EUROPLEXUS order in multi-domain

Summary:

The objective of this test is to verify the CALC_EUROPLEXUS command when it starts a multi-domain EUROPLEXUS calculation from a data set in Code_Aster and when the materials use the GLRC_DAMAGE law. We check that the results retrieved by Code_Aster following calculation EUROPLEXUS are indeed those calculated by EUROPLEXUS alone.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Precision on materials
  • 3.4. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Precision on materials
  • 4.4. Tested sizes and results