Modeling A
==============


Characteristics of modeling
------------------------

Q4GG modeling is used for the slab and POU_D_E for the beams and columns.


Characteristics of the mesh
----------------------------

The slab mesh contains 36 elements of type QUAD4. Each beam and column is discretized with 6 SEG2 meshes.


Tested sizes and results
------------------------------

At the final moment, we test the displacement, speed and acceleration values read by Code_Aster and compare them with the values from a EUROPLEXUS calculation alone.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "Point :math:`\mathit{N1}` - :math:`\mathit{DZ}` ", "'NON_REGRESSION'", ":math:`5.56E\mathrm{-}03` "," 0.011%"
    "Point :math:`\mathit{N49}` - :math:`\mathit{VRZ}` ", "'NON_REGRESSION'", ":math:`\mathrm{-}1.718E\mathrm{-}04` "," 0.016%"
    "Point :math:`\mathit{N1}` - :math:`\mathit{ARX}` ", "'NON_REGRESSION'", ":math:`5.56E\mathrm{-}03` "," 0.0004%"