v1.01.230 ZZZZ230 — Implementation of « structural zoom » on a 2D problem

Summary:

This test case allows you to test the structural zoom:

• A first model represents a roughly meshed square to which an effort is applied.

• The second model is a square that represents \(1/4\) of the first model to which we apply the displacements that were calculated with the first model.

The movements of the two models are then compared to test the validity of the « structural zoom ».

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Reference quantities
  • 2.2. Benchmark result
• 3. Modeling A
  • 3.1. Characteristics of modeling A
  • 3.2. Results
• 4. Summary of results