Reference problem
=====================

A ASTER table is generated per load case.

The IMPR_OAR command reads the Aster tables and prints them in the OAR software format.

The correct printout of the results is tested for the following cases:


* axisymmetric mechanical model,


* axisymmetric thermal model,


* mechanical model in 3D,


* 3D thermal model.


Geometry
---------

Axisymmetric thickness transition.

Y

A

B

G

C

X

F

O

D

E

*AB = 26.2 mm*

*ED = 21.4 mm*

*OC = 203.2 mm*

*BC =* 150*mm*

*CD =* 150*mm*

*The GF segment has a slope of one third.*


Material properties
--------------------

Mechanical properties
~~~~~~~~~~~~~~~~~~~~~~~

The material has elastic behavior with:


* Young's modulus E= 200,000 MPa,


* Poisson's ratio ν=0.3,


* thermal expansion coefficient α = 10.96. 10-6 /°C.


Thermal properties
~~~~~~~~~~~~~~~~~~~~~~~

The material has the following thermal properties:


* Conductivity λ = 54.6 W.m-1°c-1


* Volumic heat capacity rCp = 3.71.106 J.m-3°C-1.