Modeling B: volume thermal model
===========================================

Boundary conditions
----------------------

The face AB is blocked in the direction Y. In addition, on this face, an azimuth collinear with DZ along DX and a point collinear with DZ along DX is blocked.

The segment ED is uniformly deformed in the Y direction.


Loads
-----------

We consider a thermal transient applied to the inner skin (surface AGFE).

Loading is the same as axisymmetric modeling.


Meshing
--------

The mesh is a linear quadrangular mesh. It is converted to a quadratic mesh before mechanical resolution.

It has 4320 knots.


Results
---------

The thermal stresses are extracted from the calculation results by the operator MACR_LIGN_COUP.

The constraint result of this calculation is printed for the FC segment by the operator IMPR_TABLE and by the operator IMPR_OAR.


.. csv-table::

    "**Identification**", "**Reference type**", "**Value**"
    "NB_VALE ", "D GRESSION ", "1732"
    "VALE_CALC ", "D GRESSION ", "2.5159679962e04"