v1.01.163 ZZZZ163 — Validating the POST_BEREMIN macro command

Summary

This test validates the POST_BEREMIN [U4.81.08] command to calculate the failure probability and the Weibull stress using a Beremin model [R7.02.04]. The functionalities of the control are validated on a simple uniaxial traction problem, it is a structure with four quadratic elements modelled in 2D.

The two models in this test have the following characteristics:

• modeling A: modeling D_ PLAN

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Reference quantities and results
  • 2.2. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of the mesh
  • 3.2. Tested sizes and results
• 4. Results of modeling A
  • 4.1. Tested values
• 5. B modeling
  • 5.1. Characteristics of the mesh
  • 5.2. Tested sizes and results
• 6. B modeling results
  • 6.1. Tested values
• 7. Summary of results