1. Principle of the test

1.1. In mechanics:

• EVOL_CHAR: This keyword is used to apply evol_char loads that evolve over time such as evol_char produced by LIRE_RESU [U7.02.01] and containing pressure fields.

• PRES_REP: This keyword is used to apply pressure to a 2D or 3D continuous medium domain, pressure to a COQUE_3D shell, or shear to a 2D continuous medium domain.

• FORCE_CONTOUR: This keyword is used to apply linear forces, at the edge of a 2D element domain, defined component by component in the global coordinate system. This contour is defined by one or more cells or groups of segment-type cells.

The loads are applied to the top of a cylinder, locked at its base and modelled axisymmetrically.

We check that the solution is good with the operators MECA_STATIQUE, STAT_NON_LINE,, DYNA_NON_LINE, THER_LINEAIRE and DYNA_VIBRA.

1.2. In thermal:

The objective is to validate the need expressed by the METRONOME project.

For the fields corresponding to a heat exchange (T_ EXT and COEF_H), we validate that the calculation is possible with maps created by CREA_CHAMP or with fields by elements read in the “MED” format (LIRE_RESU), then projected onto another mesh.

This documentation is deliberately brief