B modeling
==============


Characteristics of modeling
-----------------------------------

3D modeling is used. The crack is not shown. The entries for the POST_FM operator are read from tables extracted from a prior calculation.


Characteristics of the mesh
----------------------------

The mesh contains 6 elements of type PENTA15. These elements correspond to the support of the crack bottom node :math:`B` from modeling A.


.. image:: images/10000000000001AB000001EC163948EE1313062B.png
    :width: 2.6783in
    :height: 2.4465in


.. _RefImage_10000000000001AB000001EC163948EE1313062B.png:


Tested sizes and results
------------------------------

We test the output table for operator POST_FM. This table is obtained in point :math:`B`. The results obtained are the same as those obtained by the a priory calculation.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Precision**"
    ":math:`\mathit{MIN}` - :math:`\mathit{TEMP}` ", "'NON_REGRESSION'", "39.0786", "1e-06"
    ":math:`\mathit{MIN}` - :math:`\mathit{KIC}` ", "'NON_REGRESSION'", "49692277. ", "1e-06"
    ":math:`\mathit{MAX}` - :math:`\mathit{KELAS}` ", "'AUTRE_ASTER'", "61254800. "," 0.2%"
    ":math:`\mathit{MAX}` - :math:`\mathit{KPLAS}` ", "'AUTRE_ASTER'", "76976200. "," 0.2%"
    ":math:`\mathit{MAX}` - :math:`\mathit{KCP}` ", "'NON_REGRESSION'", "76885448. ", "1e-06"
    ":math:`\mathit{MIN}` - :math:`\mathit{FM}\text{\_}\mathit{ASN}` ", "'AUTRE_ASTER'", "1.21557"," 0.5%"
    ":math:`\mathit{INST}=3300` - :math:`\mathit{FM}\text{\_}\mathit{ASN}` ", "'NON_REGRESSION'", "1.2208980", "1e-06"



notes
---------

We validate the case of a defect of type DSR, defined by the condition :math:`\mathit{max}(\mathit{KPLAS})>\mathit{max}(\mathit{KELAS})`.