v1.01.106 ZZZZ106 - Geometric criteria in DEFI_GROUP

Summary:

This test validates the various options for creating mesh groups (or nodes) using geometric criteria in command DEFI_GROUP:

• “SPHERE”

• “CYLINDRE”

• “BANDE”

• “FACE_NORMALE”

• “ENV_SPHERE”

• “ENV_CYLINDRE”

• “PLAN”

• 1. Reference problem
  • 1.1. Material properties
  • 1.2. Boundary conditions and loading
• 2. Benchmark solution
  • 2.1. Benchmark results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested features
• 4. Results of modeling A
  • 4.1. Tested values
  • 4.2. notes
• 5. B modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested features
• 6. B modeling results
  • 6.1. Tested values
  • 6.2. notes
• 7. Summary of results