Supported loads
=====================

The available loads are as follows:


* **SOURCE**

Allows you to apply solid sources to a 3D domain.

Supported models: 3D, 3D_ DIAG


* **FLUX_REP**

Allows you to apply normal flows to the faces of solid elements.

Supported models: 3D, 3D_ DIAG


* **ECHANGE**

Allows you to apply exchange conditions with an external temperature to the faces of solid elements.

Supported models: 3D, 3D_ DIAG


* **ECHANGE_PAROI**

Allows you to apply exchange conditions between two walls.

Supported models: 3D, 3D_ DIAG


* **GRAD_TEMP_INIT**

Allows you to impose a temperature gradient that is assumed to be uniform in an element

Supported models: 3D, 3D_ DIAG


* **CONVECTION**

Allows you to take into account convective heat transport terms, for THER_NON_LINE_MO only.

Supported modeling: 3D, 3D_ DIAG


* **RAYONNEMENT**

Allows you to take into account the flux radiated to infinity at the faces of solid elements

Supported models: 3D, 3D_ DIAG