Examples of implementation: test cases ===================================== Thermal --------- * **AXIS** * Stationary linear thermal TPLA07A [:external:ref:`V4.01.007 `]: Thermal analysis of an orthotropic hollow cylinder subjected to various boundary conditions (imposed flow, convection, linear variation of external temperatures). * Stationary non-linear thermal TPNA01A [:external:ref:`V4.41.001 `]: Thermal analysis of a hollow cylinder subjected to convective exchange on the inner wall and to infinity radiation on the outer wall. * Transient linear thermal TTLV01B [:external:ref:`V4.25.001 `]: Transient linear thermal analysis of a solid sphere subjected to convective heat exchange. * Transient non-linear thermal TTNA200A: non-regression test case * **PLAN** * Stationary linear thermal TPLL100B [:external:ref:`V4.02.100 `]: Thermal analysis of an anisotropic flat wall subjected to an imposed temperature and a flow. * Stationary non-linear thermal TPNL300A [:external:ref:`V4.42.300 `]: One-dimensional thermal analysis of a wall subjected to a temperature imposed on the inner wall and to an exchange by radiation on the outer wall (Test NAFEMS). * Transient linear thermal TTLP100B [:external:ref:`V4.23.100 `]: Calculate the linear transient thermal response of two plates separated by a gap in which heat is transferred between the walls. * Transient non-linear thermal TTNL02A [:external:ref:`V4.22.002 `]: Simulation of a liquid/solid phase change by introducing the latent heat of fusion through volume enthalpy. * Non-linear stationary thermal with mobile loading TPLV102A [:external:ref:`V4.04.102 `]: Transport of heat by convection and conduction in a square cavity. * **AXIS_DIAG** * Transient linear thermal TTLV100A [:external:ref:`V4.25.100 `]: Transient linear thermal analysis of a pipe assumed to be infinite in which a cold thermal shock is imposed using an exchange limit condition. * **PLAN_DIAG** * Transient linear thermal TTLL100A [:external:ref:`V4.21.100 `]: Transient linear thermal analysis of an infinite plane wall on which a cold thermal shock is imposed using an exchange limit condition. * Transient non-linear thermal TTNL02C [:external:ref:`V4.22.002 `]: Simulation of a liquid/solid phase change by introducing the latent heat of fusion through volume enthalpy. Hydration ----------- * **AXIS** TTNL03B [:external:ref:`V4.22.003 `]: simulation of an adiabatic test: analysis of the thermo-hydrating behavior of a fresh concrete sample immersed in a calorimeter, the setting being carried out with the release of heat. Drying ------- * **AXIS** HSNA102A [:external:ref:`V7.20.102 `]: Validation of the calculation of concrete drying, this is an axisymmetric test case where the water concentration is applied directly to the outer wall. * **AXIS_DIAG** HSNA102D [:external:ref:`V7.20.102 `]: Validation of the calculation of concrete drying, this is an axisymmetric test case where the water concentration is applied directly to the outer wall.