Introduction ============ The graphical recipe of the Civil Master module is based on a benchmark model that is created from scratch. It covers most of the features of the module, including pre-processing, calculation, and finally post-processing. .. image:: images/10000000000005F60000033425F88E451A675740.png :width: 6.3382in :height: 3.4055in .. _RefImage_10000000000005F60000033425F88E451A675740.png: The study in question concerns a single-level building model. This building includes several openings, with structural elements of different types: columns, beams, slabs, panels. The building is subjected to two types of external loads: its own weight and a distributed load representing the force of the wind. As for boundary conditions, the base of the building is considered to be clamped. Models created in Civil Master are three-dimensional. The x-axis and y-axis represent the horizontal axes and z the vertical axis. Glossary -------- * Slab: a horizontal structural element usually made of concrete represents the floor of each level. * Panel: a vertical surface, usually made of concrete, that represents internal or external building walls, modeling using 2D SHELL elements. * Beam: a linear element of a given section used to support the roof or floor of a building, modeled using 1d BEAM elements. * Column: Columns are vertical linear elements supporting the weight of the different floors. They are modeled using 1D BEAM elements. * Grid: a grid is a pattern of straight lines that cross each other, forming squares or rectangles. The intersection points are reference pillers useful in creating geometries for the different structural elements. * Level: a building's storey. In Civil Master, it is a set of slabs, panels, beams, and columns. * Clamp: A boundary condition consisting of a complete block of translations and rotations. Start Civil Master ------------------ +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ |**#** |1.a | +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ |**Step actions** |Activate Civil Master module. | +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ |**Instruction** | - Open Salome Meca. | + + - Click on the Civil Master icon from the modules toolbar: + | | | + + .. image:: images/10000000000000250000002802B252E7E40F9619.png + | | :width: 0.4417in | + + :height: 0.478in + | | | + + + | | | +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ |**Expected results**|Civil Master is open. | +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ |**Execution** |Manual | +--------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ *Result*: *When Civil Master is**open, **the following should show in the Model Viewer:* .. image:: images/ouverture.png :width: 5.7953in :height: 2.6335in .. _RefImage_ouverture.png: +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ |**#** |1.b | +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ |**Step actions** |Clear the model | +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ |**Instruction** | - On the three panel | + + - Click right on Model: + | | | + + .. image:: images/clear.png + | | :width: 0.4417in | + + :height: 0.478in + | | | + + + | | | +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ |**Expected results**|Clean the view | +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ |**Execution** |Manual | +--------------------+-------------------------------------------------------------------------------------------------------------------------------------------------+ *Result*: *When Civil Master is**clear, **the following should show in the Model Viewer:* .. image:: images/10000201000006BB0000030FC84B55A0F6C50E9B.png :width: 5.7953in :height: 2.6335in .. _RefImage_10000201000006BB0000030FC84B55A0F6C50E9B.png: