Bibliography
=============


1. [:ref:`Almeida, 2013 <Almeida, 2013>`] Almeida, V.S., Simonetti, H.L., & Neto, L.O. (2013). Comparative analysis of strut-and-tie models using smooth evolutionary structural optimization. Engineering Structures, 56, 1665-1675


2. [:ref:`Aurenhammer, 2013 <Aurenhammer, 2013>`] Aurenhammer, F., Klein, R., & Lee, R., R., & Lee, D. T. (2013) .Voronoi diagrams and Delaunay triangulations. World Scientific Publishing Company.


3. [:ref:`Capra et al, 1978 <Capra et al, 1978>`] Capra, A. and Maury, J. (1978). Automatic calculation of the optimal reinforcement of reinforced concrete plates or shells. Annals of the Technical Institute of Building and Public Works, 367.


4. [:ref:`Ganzereli, 2013 <Ganzereli, 2013>`] Ganzreli, S. (2013). Direct fully stressed design for displacement constraints. In 10th World Congress on Structural and Multidisciplinary Optimization, pages 19—24.


5. [:ref:`Levi, 2010 <Levi, 2010>`] Levy, D. (2010). Introduction to numerical analysis. Department of Mathematics and Center for Scientific Computation and Mathematical Modeling (CSCAMM), University of Maryland.


6. [:ref:`Li, 1990 <Li, 1990>`] Li, X. (1990). Truss structure optimum design and its engineering application. Computers & Structures, 36 (3) :567—573.


7. [:ref:`Lövgren, 2011 <Lövgren, 2011>`] Lovgren, S., & Norberg, E. (2011). Topology Optimization of Vehicle Body Structure for improved Ride & Handling.


8. [:ref:`Mendoza-Chávez, 2018 <Mendoza-Chávez, 2018>`] Mendoza Chavez G. (2018). *Strut-and-tie models for the design of non-flexural elements: computational aided approach*. Paris-Est University. Doctoral thesis.


9. [:ref:`EDF R&D, 2018 <EDF R&D, 2018>`] EDF R&D Functional specifications of the post-treatment tool using rods and ties 6125-172018-02375 EN Version 0.3


10. [:ref:`EN 1992-1-1 <EN 1992-1-1>`] European Standards - Eurocode 2 Design of concrete structures Part 1-1: General rules and rules for buildings


11. [:ref:`Ohsaki, 2002 <Ohsaki, 2002>`] Ohsaki, M. and Swan, C. (2002). Topology and geometry optimization of trusses and frames. Recent advances in optimal structural design.


12. [:ref:`Schlaich et al, 1987 <Schlaich et al, 1987>`] Schlaich, J., Schäfer, K., & Jennewein, M. (1987). Toward a consistent design of structural concrete. PCI journal, 32 (3), 74-150.


13. [:ref:`Thompson, 2002 <Thompson, 2002>`] Thompson, K. (2002). *The Anchorage Behavior of Headed Reinforcement*


14. *in CCT nodes and lap splices.* PhD thesis.