Results of a triaxial test
=============================

The aim is to simulate a triaxial test (see the ssnv211 test case) by imposing :math:`5\mathit{MPa}` as a confinement constraint. A uniaxial deformation is imposed under compression and which evolves over time.

The load speed is set to :math:`{10}^{\mathrm{-}5}m\mathrm{/}s`. The stress deflector and the volume deformation as a function of the imposed axial deformation are shown opposite.


.. image:: images/100000000000034A000002531510887D2E514852.png
    :width: 5.4957in
    :height: 3.5402in


.. _RefImage_100000000000034A000002531510887D2E514852.png:

Figure 5-1: Stress deflector as a function of uniaxial deformation


.. image:: images/100000000000034A00000253930A55A443820B4E.png
    :width: 5.2673in
    :height: 3.0819in


.. _RefImage_100000000000034A00000253930A55A443820B4E.png:

Figure 5-2: Volume deformation as a function of uniaxial deformation