.. _r5.03.03:

**r5.03.03** Taking into account the hypothesis of plane constraints in nonlinear behaviors
========================================================================================================

**Summary:**

This document describes a general method for integrating nonlinear behavior models (elastoplastic, viscoplastic, damaging,...) into plane stresses.

This is achieved by a static condensation method due to R. de Borst.

This method makes it possible to use the C_ PLAN modeling, or the COQUE_3D, DKT and TUYAU modeling, or the, and models for all the incremental behavior models of (STAT/DYNA) _ NON_LINE available in axisymmetric or in plane deformations.


.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Introduction
    Difficult__d_int_gration_des_comportements_non_lin_aires_en_contraintes_planes
    Principe_du_traitement_des_contraintes_planes_par_la_m_thode_De_Borst
    Aspects_pratiques_d_utilisation
    Bibliographie
    Historique_des_versions_du_document