Use in Code_Aster
===========================

This paragraph shows how to insert cables into the relevant Code\ _\ *Aster* commands.

.. csv-table::

    "**Command**", "**Factor Key**", "**Keyword**", "**Argument**"
    "AFFE_MODELE "," AFFE "," GROUP_MA ", "Name of the group of elements supporting a cable."
    "", "", "PHENOMENE ", "'MECANIQUE'."
    "", "", "MODELISATION ", "'CABLE'."
    "DEFI_MATERIAU "," CABLE ", "E", "Material modulus value."
    "", "", "EC_SUR_E ", "Ratio of the compression module (very low and may be zero) to the module."
    "AFFE_CARA_ELEM "," CABLE "," GROUP_MA ", "Name of the group of elements supporting a cable."
    "", "", "SECTION ", "Cable cross section value."
    "", "", "N_ INIT ", "Initial voltage in the cable"
    "STAT_NON_LINE "," COMPORTEMENT "," GROUP_MA ", "Name of the group of elements supporting a cable."
    "", "", "RELATION ", "'CABLE'"
    "", "", "DEFORMATION ", "'GROT_GDEP'"