Q4GG modeling validation
==================================




SDLS123 — Straight beam with Rayleigh damping (V2.03.123)
------------------------------------------------------------------

This test represents the dynamic elastic calculation with Rayleigh damping of a straight beam, embedded at both ends and subjected to constant pressure. The results obtained are compared with the results obtained with Europlexus.

Two models are carried out:


* Modeling A allows you to test the Q4GG model with QUAD4,


* B modeling allows you to test the Q4GG model with TRIA3.


.. image:: images/10000000000003C2000001B612F2E397103B1D3B.png
    :width: 4.3535in
    :height: 1.948in


.. _RefImage_10000000000003C2000001B612F2E397103B1D3B.png:




SDNS108 — Dynamic response of a reinforced concrete slab (model GLRC_DAMAGE) supported on 4 sides subjected to a concentrated load: regime of 4.2 elasto-plastic plate (V5.06.108)
-------------------------------------------

This test represents the calculation of a reinforced concrete slab, in flexure, subjected to a concentrated load. It makes it possible to validate the Q4GG modeling using the global material model GLRC_DAMAGE by comparing it to an analogous calculation with Europlexus. The slab is simply pressed on all four sides.

Two models are carried out:


* Modeling :math:`A` allows you to test the Q4GG model with QUAD4,


*

    .. image:: images/Shape1.gif


    .. _RefSchema_Shape1.gif:

Modeling :math:`B` allows you to test the Q4GG model with TRIA3.